Link Status - CNET CWP-906 User Manual

4.2.9 Link Status

4.2.9.1 Link Status
The link status page displays detailed information about the current connection as shown in Figure 2-9.
1. Status: Current connection status. If no connection, it will show Disconnected. Otherwise, the SSID and BSSID will
show here.
2. Extra Info: Display link status in use.
3. Channel: Display current channel in use.
4. Authentication: Authentication mode in use.
5. Encryption: Encryption type in use.
6. Network Type: Network type in use.
7. IP Address: IP address about current connection.
5. Sub Mask: Sub mask about current connection.
9. Default Gateway: Default gateway about current connection.
10. Link Speed: Show current transmit rate and receive rate.
11. Throughout: Display transmits and receive throughput in unit of Mbps.
12. Link Quality: Display connection quality based on signal strength and TX/RX packet error rate.
13. Signal Strength 1~3: Receive signal strength 1~3, user can choose to display as percentage or dBm format.
14. Noise Strength: Display noise signal strength.
15. HT: Display current HT status in use, containing BW, GI, MCS, SNR0, and SNR1 value.
for 802.11n wireless card. )
Figure 2-9 Link Status function.
(Show the information only
CNet Technology Inc.
www.CNet.com.tw