CNET CWP-906 User Manual page 64

.
8. Then connect successfully. The result will be displayed as it is in the figure below
Describe "WPS Status Bar" - "PBC - xxx" as follow:
:
1. A successful PBC Configuration
Start PBC connection -> Scanning AP
-> Begin associating to WPS AP ->Associated to WPS AP
-> Sending EAPOL-Start -> Sending EAP-Rsp (ID)
->Receive EAP-Rsp (Start) -> Sending M1 -> Received M2
-> Sending M3 ->Received M4 -> Sending M5 -> Received M6
-> Sending M7 -> Received M8 ->Sending EAP-Rsp (Done)
-> Configured -> WPS status is disconnected
-> WPS status is connected successfully-SSID
2. No PBC AP available :
Scanning AP -> No PBC AP available -> Scanning AP -> No PBC AP available....
3. Too Many PBC AP available :
Scanning AP -> Too Many PBC AP available -> Scanning AP -> Too Many PBC AP available ->
4. WPS configuration doesn't complete after two-minute connection
WPS Eap process failed.
CNet Technology Inc.
www.CNet.com.tw