Table of Contents
Advertisement
4.2.2.2 Add / Edit Profile
There are three methods to open the Profile Editor dialog box.
1. You can open it by clicking the "Add to Profile" button in the Site Survey tab.
2. You can open it by clicking the "Add" button in the Profile tab.
3. You can open it by clicking the "Edit" button on the Profile tab
Figure 2-2-2 Configuration
1. Profile Name: The user can chose any name for this profile, or use the default name defined by system.
2. SSID: The user can key in the intended SSID name or select one of the available APs from the drop-down list.
3. Power Save Mode: Choose CAM (Constantly Awake Mode) or Power Saving Mode.
4. Network Type: There are two types, infrastructure and 802.11 Ad-hoc modes. Under Ad-hoc mode, user can also
choose the preamble type. The available preamble type includes auto and long. In addition, the channel field will be availa-
ble for setup in Ad-hoc mode.
5. RTS Threshold: User can adjust the RTS threshold number by sliding the bar, or key in the value directly. The default
value is 2347.
6. Fragment Threshold: User can adjust the Fragment threshold number by sliding the bar or key in the value directly.
The default value is 2346.
7. Channel: Only available for setting under Ad-hoc mode. Users can choose the channel frequency to start their Ad-hoc
network. Authentication Type: There are 7 type of authentication modes supported by RaUI. They are open, Shared, LEAP,
WPA and WPA-PSK, WPA2 and WPA2-PSK.
CNet Technology Inc.
www.CNet.com.tw
Advertisement
Table of Contents
