Raui; Start; Startraui - CNET CWP-906 User Manual

Wireless-n pci adapter
Table of Contents

Advertisement

B. RaUI

4.2.1 Start

4.2.1.1 Start RaUI
When starting RaUI, the system will connect to the AP with best signal strength without setting a profile or matching a pro-
file setting. When starting RaUI, it will issue a scan command to a wireless NIC. After two seconds, the AP list will be up-
dated with the results of a BSS list scan. The AP list includes most used fields, such as SSID, network type, channel used,
wireless mode, security status and the signal percentage. The arrow icon indicates the connected BSS or IBSS network. The
dialog box is shown in Figure 2-1.
Figure 2-1-1 RaUI section introduction
There are three sections to the RaUI dialog box. These sections are briefly described as follow.
CNet Technology Inc.
www.CNet.com.tw

Advertisement

Table of Contents
loading

Table of Contents