Table of Contents
Advertisement
3. Config Methods: Correspond to the methods the AP supports as an Enrollee for adding external Registrars. (A bitwise
OR of values)
Value
0x0001
0x0002
0x0004
0x0008
0x0010
0x0020
0x0040
0x0080
0x0100
4. Device Password ID: Indicates the method or identifies the specific password that the selected Registrar intends to use.
APs in PBC mode must indicate 0x0004 within two-minute Walk Time.
Value
0x0000
0x0001
0x0002
0x0003
0x0004
0x0005
0x0006-0x000F
5. Selected Registrar: Indicates if the user has recently activated a Registrar to add an Enrollee. The values are "TRUE"
and "FALSE".
6. State: The current configuration state on AP. The values are "Unconfigured" and "Configured".
7. Version: WPS specified version. AP Setup Locked: Indicates if the AP has entered a setup locked state.
8. UUID-E: The universally unique identifier (UUID) element generated by the Enrollee. This is a 16 byte value.
9. RF Bands: Indicates all the RF bands available on the AP. A dual-band AP must
10. Provide it. The values are "2.4GHz" and "5GHz".
Hardware Interface
USBA (Flash Drive)
Ethernet
Label
Display
External NFC Token
Integrated NFC Token
NFC Interface
Push Button
Keypad
Description
Default (PIN)
User-specified
Rekey
Display
Push-button (PBC)
Registrar-specified
Reserved
CNet Technology Inc.
www.CNet.com.tw
Advertisement
Table of Contents
