Table of Contents
Advertisement
5. When Errors occur within
two-minutes of establishing a
connection, the WPS status bar might report "WPS Eap
process failed".
Error messages might be:
1. Receive EAP with wrong NONCE.
2. Receive EAP without integrity.
3. An inappropriate EAP-FAIL received.
Describe "Multiple PBC session overlaps" as follow:
a. Dual bands:
AP1 is a G-Band AP using PBC mode. (ID = 0x0004)
AP2 is a A-Band AP using PBC mode. (ID = 0x0004)
They have the same UUID-E.
STA would regard these two APs as a dual-radio AP and select one band to connect.
b. Different UUID-E :
AP1 is a G-Band AP using PBC mode. (ID = 0x0004)
AP2 is a G-Band AP using PBC mode. (ID = 0x0004)
They have the different UUID-E.
STA would regard these two APs as two different APs and wait until only one PBC AP is available.
CNet Technology Inc.
www.CNet.com.tw
Advertisement
Table of Contents
