Table of Contents
Advertisement
4.2.4 Advanced functions
4.2.4.1 Advanced functions
Figure 2-4 shows the Advance functions of RaUI.
Figure 2-4 Advance function
1. Wireless mode: Select wireless mode. 2.4G, 5G and 2.4+5G are supported.
2. Wireless Protection: Users can choose from Auto, On, and Off.
(This is not supported by 802.11n adapters.)
a. Auto: STA will dynamically change as AP announcement.
b. On: The frames are always sent with protection.
c. Off: The frames are always sent without protection.
3. TX Rate: Manually select the transfer rate. The default setting is auto.
(802.11n wireless cards do not allow the user to
select the TX Rate.)
4. Enable TX Burst: Ralink's proprietary frame burst mode.
5. Enable TCP Window Size: Optimise the TCP window size to allow for greater throughput.
6. Fast Roaming at-: enables fast roaming, which is set by the transmit power.
7. Select Your Country Region Code: There are eight countries to choose from in the country channel list.
(11A ListBox
only shows for 5G adapter.)
8. Show Authentication Status Dialog: When you connect to an AP with
authentication, choose whether show the "Authentication Status Dialog" or not. The Authentication Status Dialog displays
the processes during 802.1x authentication.
9. Enable CCX (Cisco Compatible Extensions): Choose whether Cisco Compatible Extensions are supported or not.
LEAP turn on CCKM.
a.
b Enabled Radio Measurement: can measure the channel every 0~2000
milliseconds
10. Apply the above changes
4.2.5 Statistics
4.2.5.1 Statistics
The Statistics page displays detailed counter information based on 802.11 MIB counters. This page translates that MIB
counters into a format easier for the user to understand. Figure 2-5-1 shows the detailed page layout.
CNet Technology Inc.
www.CNet.com.tw
Advertisement
Table of Contents
