Task
Enable or disable FTP operation
information display.
Enable or disable FTP client debugging.
Clear the reply information in the buffer.
Terminating the FTP connection
Task
Terminate the connection to the FTP server
without exiting FTP client view.
Terminate the connection to the FTP server
and return to user view.
Displaying command help information
To display command help information after you log in to the server:
Task
Display command help information.
Displaying and maintaining FTP client
Execute the display command in any view.
Task
Display source IP address information on the FTP client.
FTP client configuration example in standalone
mode
Network requirements
Use the device as the FTP client and the PC as the FTP server.
•
Log in to the FTP server from the FTP client using the user account with username abc and password
•
123456 (which has been created on the PC).
Command
verbose
debug
reset
Command
•
disconnect
•
close
•
bye
•
quit
Command
•
help [ command-name ]
•
? [ command-name ]
Command
display ftp client source
83
Remarks
By default, this function is enabled.
By default, FTP client debugging is
disabled.
N/A
Remarks
Use either command in FTP client view.
Use either command in FTP client view.
Remarks
Use either command.