Login Attempts By Radius Users Always Fail - HP 10500 Series Configuration Manual

Login attempts by RADIUS users always fail

Symptom
Attempts by a RADIUS user to log in to the network access device always fail, even though the network
access device and the RADIUS server can communicate with one another and all AAA settings are
correct.
Analysis
RBAC requires that a login user have at least one user role. If the RADIUS server does not authorize the
login user to use any user role, the user cannot log in to the device.
Solution
Resolve the problem in one of the following ways:
Configure the role default-role enable command so a RADIUS user can log in with the default user
•
role when no user role is assigned by the RADIUS server.
• Add the user role authorization attributes on the RADIUS server.
73