HP 10500 Series Configuration Manual page 148

flash:/feature1-r2110.bin
Active packages on chassis 2 slot 1:
flash:/boot-r2110.bin
flash:/system-r2110.bin
flash:/feature1-r2110.bin
# Identify the ISSU method and possible impacts of the upgrade on the IRF fabric.
<Sysname> display version comp-matrix file feature flash:/feature1-r2111.bin
Feature image: flash:/feature1-r2111.bin
Version:
V700R001B45D002
Version Compatibility List:
V700R001B45D002
Version Dependency System List:
V700R001B45D001
V700R001B45D002
The output shows that the two versions are incompatible. The cards will be rebooted for the upgrade.
# Upgrade feature1 on the subordinate member. After the upgrade, the subordinate member will leave
the original IRF fabric and form a new IRF fabric by itself.
<Sysname> issu load file feature flash:/feature1-r2111.bin chassis 2
This operation will delete the rollback point information for the previous upgrade and
maybe get unsaved configuration lost. Continue? [Y/N]:y
Upgrade summary according to following table:
flash:/feature1-r2111.bin
Running Version
Release 2110
Chassis Slot
2 0
2 1
Upgrading software images to incompatible versions. Continue? [Y/N]: y
# Perform a master/subordinate switchover to upgrade the original master. The original master will
reboot and join the new IRF fabric.
<Sysname> issu run switchover
Upgrade summary according to following table:
flash:/feature1-r2111.bin
Running Version
Release 2110
Chassis Slot
1 0
1 1
Upgrading software images to incompatible versions. Continue? [Y/N]: y
# Verify that both members are running the new image.
<Sysname> display install active
Active packages on chassis 1 slot 0:
New Version
Release 2111
Upgrade Way
Reboot
Reboot
New Version
Release 2111
Upgrade Way
Reboot
Reboot
140