HP 10500 Series Configuration Manual page 94

# Download the file temp.bin from the PC to the Flash root directory of the global standby MPUs. (In this
example, the IRF fabric has three standby MPUs: one in slot 1 of member device 1, one in slot 0 of
member device 2, and one in slot 1 of member device 2.)
ftp> get temp.bin chassis1#slot1#flash:/temp.bin
ftp> get temp.bin chassis2#slot0#flash:/temp.bin
ftp> get temp.bin chassis2#slot1#flash:/temp.bin
# Upload the configuration file config.cfg from the IRF fabric to the PC for backup.
ftp> ascii
200 TYPE is now ASCII
ftp> put config.cfg back-config.cfg
local: config.cfg remote: back-config.cfg
150 Connecting to port 47461
226 File successfully transferred
3494 bytes sent in 5.646 seconds (618.00 kbyte/s)
ftp> bye
221-Goodbye. You uploaded 2 and downloaded 2 kbytes.
221 Logout.
<Sysname>
86