Feature Rollback Example - HP 10500 Series Configuration Manual

flash:/system-r2110.bin
flash:/feature1-r2111.bin
Active packages on slot 1:
flash:/boot-r2110.bin
flash:/system-r2110.bin
flash:/feature1-r2111.bin
# Confirm the software change.
<Sysname> install commit

Feature rollback example

Rollback requirement
As shown in
MPU).
Roll back the feature1 feature from R21 1 1 to R21 10.
Rollback procedure
# Display active software images.
<Sysname> display install active
Active packages on slot 0:
flash:/boot-r2110.bin
flash:/system-r2110.bin
flash:/feature1-r2111.bin
Active packages on slot 1:
flash:/boot-r2110.bin
flash:/system-r2110.bin
flash:/feature1-r2111.bin
# Display available rollback points.
<Sysname> display install rollback
Install rollback information 1 on slot 0:
Updating from flash:/feature1-r2110.bin
Install rollback information 2 on slot 1:
Updating from flash:/feature1-r2110.bin
# Roll back the feature to R21 10.
<Sysname> install rollback to original
# Display active software images.
<Sysname> display install active
Active packages on slot 0:
flash:/boot-r2110.bin
flash:/system-r2110.bin
flash:/feature1-r2110.bin
Active packages on slot 1:
flash:/boot-r2110.bin
flash:/system-r2110.bin
Figure 45, Device has two MPUs: one in slot 0 (active MPU) and the other in slot 1 (standby
to flash:/feature1-r2111.bin.
to flash:/feature1-r2111.bin.
151