Parameters
pql-index: PQL index in the range of 1 to 16.
queue-length: Queue length for the specified queue, in the range of 1 to 1024. 20 for the top queue
20 for the top queue
•
40 for the middle queue
•
•
60 for the normal queue
80 for the bottom queue
•
Usage guidelines
If a queue is full, all subsequent packets to this queue are dropped.
Examples
# Set the length of the top queue in PQL 10 to 10.
<Sysname> system-view
[Sysname] qos pql 10 queue top queue-length 10
Related commands
qos pql default-queue
•
qos pql protocol
•
qos pq
•
CQ commands
display qos cq interface
Use display qos cq interface to display the custom queuing (CQ) configuration and statistics on an
interface.
Syntax
display qos cq interface [ interface-type interface-number ] [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
interface-type interface-number: Specifies an interface by its type and number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
91