Related commands
qos sp
qos sp
Use qos sp to configure SP queuing on an interface.
Use undo qos sp to restore the default.
Syntax
qos sp
undo qos sp
Default
SP queuing is used.
Views
Interface view, port group view
Default command level
2: System level
Parameters
None.
Usage guidelines
Settings in interface view take effect on the current interface. Settings in port group view take effect on all
ports in the port group.
Examples
# Enable SP queuing on GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] qos sp
Related commands
display qos sp interface
WRR queuing commands
display qos wrr interface
Use display qos wrr interface to display the weighted round robin (WRR) queuing configuration on an
interface.
Syntax
display qos wrr interface [ interface-type interface-number ] [ | { begin | exclude | include }
regular-expression ]
Views
Any view
115