Usage guidelines
The qos gts any, qos gts acl, and qos gts queue commands are mutually exclusive with one another.
GTS for software forwarding does not support IPv6.
Examples
# Shape the packets matching ACL 2001 on GigabitEthernet 1/0/1. The GTS parameters are as follows:
CIR is 200 kbps, CBS is 50000 bytes, EBS is 0, and the maximum buffer queue length is 100.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] qos gts acl 2001 cir 200 cbs 50000 ebs 0 queue-length 100
Related commands
acl
Rate limit commands
display qos lr interface
Use display qos lr interface to view the rate limit configuration information and operational statistics on
a specified interface or all the interfaces.
Syntax
display qos lr interface [ interface-type interface-number ] [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
interface-type interface-number: Specifies an interface by its type and number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If no interface is specified, this command displays the rate limit configuration information and
operational statistics on all the interfaces.
If a VT interface is specified, this command displays QoS rate limit information of all VA interfaces
inheriting the VT interface, but does not display QoS information about the VT interface.
Examples
# Display the rate limit configuration information and operational statistics on all the interfaces.
82