Qos Max-Bandwidth - HP HSR6800 Command Reference Manual

Table 33 Command output
Field
Interface
Output queue
Size
Length
Discards
EF
AF
BE
Active
Max active
Total
Available
Max reserve

qos max-bandwidth

Use qos max-bandwidth to configure the maximum available bandwidth of the interface.
Use undo qos max-bandwidth to restore the default.
Syntax
qos max-bandwidth bandwidth
undo qos max-bandwidth
Views
Interface view
Default command level
2: System level
Parameters
bandwidth: Maximum available bandwidth of the interface, in the range of 1 to 10000000 kbps.
Usage guidelines
HP recommends that you configure the maximum available bandwidth to be smaller than the actual
available bandwidth of a physical interface or logical link.
If the maximum available bandwidth is not configured, the base QoS bandwidth used for CBQ
calculation is as follows:
Actual baudrate or rate of an physical interface.
•
• Total bandwidth of a logical serial interface formed by binding, such as E1 interfaces, MFR
interfaces, and MP interfaces.
1000000 kbps for template interfaces such as VT and VE interfaces.
•
Description
Interface type and interface number.
Information about the current output queue.
Number of packets in the queue.
Queue length.
Number of dropped packets.
EF queue.
AF queue.
BE queue.
Number of active BE queues.
Maximum number of active BE queues allowed.
Total number of BE queues.
Available bandwidth for CBQ.
Maximum reserved bandwidth for CBQ.
101