Queue - HP HSR6800 Command Reference Manual

undo qos wred table table-name
Default
No global WRED table is created.
Views
System view
Default command level
2: System level
Parameters
queue: Creates a queue-based table. Packets are dropped based on the queue when congestion occurs.
table table-name: Specifies a name for the table.
Usage guidelines
A WRED table in use cannot be removed.
A queue-based WRED table applies to only Layer 2 ports.
Examples
# Create an EXP-based WRED table named 1.
<Sysname> system-view
[Sysname] qos wred exp table 1
Related commands
• qos wfq
qos wred enable
•
• display qos wred interface

queue

Use queue to configure the drop-related parameters for a specified queue in the queue-based WRED
table.
Use undo queue to restore the default.
Syntax
queue queue-value [ drop-level drop-level ] low-limit low-limit [ discard-probability discard-prob ]
undo queue { queue-value | all }
Default
A global queue-based WRED table has a set of default available parameters.
Views
WRED table view
Default command level
2: System level
Parameters
queue-value: Queue number. This argument is available on only Layer 2 ports.
132