Fragment - HP HSR6800 Command Reference Manual

Views
FR interface view, MFR interface view
Default command level
2: System level
Usage guidelines
FRTS is applied to the outgoing interfaces and are usually applied to the DCE of an FR network.
Examples
# Enable FRTS on Serial 2/0/1.
<Sysname> system-view
[Sysname] interface Serial 2/0/1
[Sysname-Serial2/0/1] fr traffic-shaping
Related commands
• fr class
fr-class
•
fr dlci (Layer 2—WAN Command Reference)
•

fragment

Use fragment to enable the packet fragmentation function (conforming to frame relay forum's FRF.12) for
FR PVCs.
Use undo fragment to disable the packet fragmentation function.
Syntax
fragment [ fragment-size ]
undo fragment
Default
The packet fragmentation function is disabled for FR PVCs.
Views
FR class view
Default command level
2: System level
Parameters
fragment-size: Fragment size in the range of 16 bytes to 1600 bytes. This argument is 45 bytes by default.
Usage guidelines
If neither data-level nor voice-level is specified, the fragment size is specified for data packets.
Examples
# Enable the packet fragmentation function with the fragment size of 128 bytes for the FR class test1.
<Sysname> system-view
[Sysname] fr class test1
[Sysname-fr-class-test1] fragment 128
154