Configuring Mac Information Mode; Configuring The Interval For Sending Syslog Or Trap Messages; Configuring The Mac Information Queue Length; Mac Information Configuration Example - HP 6600 Configuration Manual

Configuring MAC Information mode

Step
1. Enter system view.
2. Configure MAC Information
mode.
Configuring the interval for sending syslog or trap
messages
To prevent syslog or trap messages from being sent too frequently, change the interval for sending syslog
or trap messages.
To set the interval for sending syslog or trap messages:
Step
1. Enter system view.
2. Set the interval for sending
syslog or trap messages.

Configuring the MAC Information queue length

Step
1. Enter system view.
2. Configure the MAC
Information queue length.

MAC Information configuration example

Network requirements

Enable MAC Information on GigabitEthernet 4/0/1 on Router in
changes in syslog messages to Host B.
Command
system-view
mac-address information mode
{ syslog | trap }
Command
system-view
mac-address information interval
interval-time
Command
system-view
mac-address information
queue-length value
9
Remarks
N/A
Optional.
The default setting is trap.
Remarks
N/A
The default setting is one second.
Remarks
N/A
The default setting is 50.
Figure 2 to send MAC address