Settings - System Settings - Network - Wired Lan - Tcp/Ip - Epson TM-T88V-DT Technical Reference Manual

Settings - System settings - Network - Wired LAN - TCP/IP

Sets the IP address, etc. of this product's cable LAN.
Item
Get IP Address
IP Address
Subnet Mask
Default Gateway
Acquire DNS Server 
Address Automatically
DNS Server Address(in order of use)
Print IP Address *
Apply
 This can be used in TM-DT software Ver.3.0 or later.
Chapter 4 System Development Using TM-DT Software
Description
Sets the method of getting the IP address.
Sets the IP address when [Get IP Address] is set to [Manual].
Sets the subnet mask when [Get IP Address] is set to [Manual].
Sets the default gateway when [Get IP Address] is set to [Manual].
Sets the method of getting the address of the DNS server when [Get IP
Address] is set to [Manual].
Sets the addresses of the DNS server in order of usage when [Acquire
DNS Server Address Automatically] is set to [Disable].
When this setting is [Enable], if [Get IP Address] is set to [Auto], the IP
address is printed when it is acquired.
Registers the settings to this product.
4
112