Self-test mode
You can confirm the following information by running the self-test mode.
Printer firmware version
Receive buffer size
BUSY conditions
Built-in character sets
Print density
Maintenance Information (Print head running length, count of auto-cutting)
.
Follow the steps below
1
Close the roll paper cover.
2
While pressing the Feed button, turn on the printer. (Keep pressing the Feed button
until the printer starts printing.)
After the printer status is printed, the self-test printing continuance guidance is printed and Paper
LED flashes.
3
Press the Feed button for less than 1 second to continue the self-test.
Built-in characters are printed with rolling printing.
After printing "*** completed ***", the printer is initialized and enters the normal mode.
Chapter 2 Printer Functions and Settings
2
58