Settings - System Settings - Network - Wireless Lan - Epson TM-T88V-DT Technical Reference Manual

Settings - System settings - Network - Wireless LAN

Performs settings for a wireless LAN network when the optional wireless LAN cable set (OT-WL01) is used.
Item
SSID
Network mode
Authentication Method
Security Mode
Default WEP Key
WEP key
WPA/WPA2 Pre-Shared Key
Apply
Chapter 4 System Development Using TM-DT Software
Description
Sets the SSID.
If you want to set an optional SSID, select [ Input directly ] and set the
optional SSID. ASCII characters including space characters can be used
for the SSID.
If using an existing SSID, select [ Select from the list ] and configure an
optional SSID from the list.
Sets this product's network mode.
Sets the authentication algorithm.
In the initial settings, the authentication system is set to Open System.
For security reasons, use this product after first changing the setting.
Sets the encryption algorithm.
In the initial settings, the encryption system is set to None. For security
reasons, use this product after first changing the setting.
Sets the WEP key to use.
Sets the WEP key.
ASCII characters including space characters can be used for the WEP key.
Enter the pass phrase of the pre-shared key when [Security mode] is set
to "WPA" or "WPA2".
ASCII characters including space characters can be used for the pre-
shared key.
Registers the settings to this product.
4
113