Settings - Web Service Settings - Print Settings - Spooler - Epson TM-T88V-DT Technical Reference Manual

Settings - Web service settings - Print Settings - Spooler

Performs settings for spooler and print forwarding.
This can be used in TM-DT software Ver.3.0 or later.
You can set the spooler and print forwarding when you have set [Enable] under [Spooler] in the
service settings - Startup settings" (page 101)
Item
Spooler 
Retry
Settings
Message Text Message Text
Text Attributes
Position
Cut
Apply
Print forward- Primary Printer
ing route to be
Secondary Printer
registered
Tertiary Printer
Register
Registered Print forwarding routes
Delete
Count Sets the number of retries for when printing error occurs.
When printing fails for the set number of times, printing is performed
from the forwarded printer if the forwarding path is set.
Interval (sec.) Sets the interval between retries when printing error occurs.
Sets the character string of the notice message that is printed when for-
ward processing takes place.
Sets the character decoration of the notice message.
Sets the printing position of the notice message.
Sets whether or not to cut the paper after printing the notice message.
Saves the notice message settings to this product.
Sets the printer to be set for forwarding path.
Sets the forwarded printer for cases where the primary printer fails to
print.
Sets the forwarded printer for cases where the primary printer and the
secondary printer fail to print.
Saves the forwarding path settings to this product.
A list of the registered forwarding paths is displayed.
Deletes the settings of ticked forwarding paths.
Chapter 4 System Development Using TM-DT Software
Description
"Settings - Web
4
107