Settings - System Settings - Network - Wired Lan - Tcp/Ip - Epson TM-H6000IV-DT Technical Reference Manual

Settings - System settings - Network - Wired LAN - TCP/IP

Sets the IP address, etc. of this product's cable LAN.
Item
Get IP Address
IP Address
Subnet Mask
Default Gateway
Acquire DNS Server
Address Automatically
DNS Server Address(in order of use)
Print IP Address *
Apply
∗ This can be used in TM-DT software Ver.3.0 or later.
Chapter 4 System Development Using TM-DT Software
Description
Sets the method of getting the IP address.
Sets the IP address when [Get IP Address] is set to [Manual].
Sets the subnet mask when [Get IP Address] is set to [Manual].
Sets the default gateway when [Get IP Address] is set to [Manual].
Sets the method of getting the address of the DNS server when [Get IP
Address] is set to [Manual].
Sets the addresses of the DNS server in order of usage when [Acquire
DNS Server Address Automatically] is set to [Disable].
When this setting is [Enable], if [Get IP Address] is set to [Auto], the IP
address is printed when it is acquired.
Registers the settings to this product.
4
110