Automatic Paper Cut - Epson TM-T88V-DT Technical Reference Manual

Setting the number of head energizing parts
 One-part energizing (initial setting)
 Two-part energizing
 Four-part energizing
 Usually, the number of head energizing parts does not need to be changed.
 The maximum print speed (300 m/s {11.81"/s}) can be performed only when one-part energiz-
ing is selected.
Power Supply unit capacity
Selectable from levels 1 to 3 (Low High) (initial setting: level 3) When a problem such as a low voltage error and
power shutdown occurs due to the print pattern or the power supply environment, you might work around the
problem by setting the power supply unit capacity.
If you cannot solve the problem by setting the power supply unit capacity to "level 1", you can try reducing the
print speed, increasing the number of head energizing parts, or revising the print pattern (reducing the print
volume).

Automatic paper cut

 Not use this function (initial setting)
 Cut paper when the cover is closed
 Print logo when paper is cut
"Printing logo when paper is cut" is not available with software setting mode.
Setting the paper reduction
The paper feed (margin) part and bar code included in the print data can be reduced.
 Extra upper space reduction
 Extra lower space reduction
 Line space reduction rate
 Line feed reduction rate
 Barcode height reduction rate
Chapter 2 Printer Functions and Settings
2
56