Settings - Web Service Settings - Serial Communication Device - Epson TM-T88V-DT Technical Reference Manual

Settings - Web Service settings - Serial communication Device

Performs the settings for serial communication devices controlled by TM-DT Software.
You can set the serial communication devices when you have set [Enable] under [Device control] in the
tings - Web service settings - Startup settings" (page 101)
Item
Device ID
D e v i c e Model selection
name
Port selection
Display port location
Control script
Communication speed (bps)
Data bit
Parity
Stop bit
Flow control
Add
Registered serial 
communication device
Detailed display
Operating test
Delete
Set the device ID.
Select the device model name.
Select the device port.
Physical serial Serial port on the rear of this product.
port
USB port 1 ~ 6 USB ports on the rear of this product.
If connecting a serial device using the COM-USB cable, select the appro-
priate USB port.
The USB port numbers can be confirmed on [Display port location].
Displays the window that shows this product's port positions.
Select the device control script for controlling the serial communication
device.
Register device control scripts as necessary. For details, refer to
- Web service settings - Control Script - Add/delete" (page
Set the device communication speed.
Set the data bit.
Set the parity.
Set the stop bit.
Set the flow control.
Registers the serial communication device on this product.
Displays a list of registered serial communication devices.
Displays the device settings confirmation window.
Performs an operating test for a registered serial communication device.
1. Click to display the "Operating Test" window.
2. Enter a value and click [Send].
3. Confirm that correct operation is performed.
Deletes a registered serial communication device.
Chapter 4 System Development Using TM-DT Software
Description
"Set-
"Settings
106).
4
105