Web Service Settings - Server Access - Device Data Notification - Epson TM-T20II-i Technical Reference Manual

Web Service Settings - Server Access - Device Data Notification

You can set the device data notification for this product.
You can use with TM-i firmware Ver.4.3 or later for this product.
Item
Settings Device Data
Notification
Server
Access
POST
Error
C a p t u r e Devices
Devices
Apply
Sets whether to use the Device Data Notification function or not.
Select [Enable] or [Disable].
ID Set ID for the server-side program to identify TM-T20II-i when
[Device Data Notification] is set to [Enable]. This ID becomes the
user ID used for Digest access authentication. The set value will
also be passed as an ID parameter value for the form data posted
to the server.
Password Set your password used for Digest access authentication when
[Device Data Notification] is set to [Enable].
URL Specify the Test_print.php address of the Web server when [Device
Data Notification] is set to [Enable].
Example: http://[IP address of the Web Server]/Test_status.php
Click the [Access Test] button to check if the address is accessible.
Server Sets whether the server authentication is performed with the
Authentica registered certificate when accessed through https.
tion
Box ID Set the Box ID for the communication device, when [Device Data
Notification] is set to [Enable].
Print Set whether or not to print an error message, if POST fails.
Message
Message Set the text for the error messages.
Text
Text Set the text decorations for the error messages.
Attributes
Cut Set whether or not to cut paper after printing an error message.
Select the devices that use device data notification.
Save settings to TM-T20II-i.
Chapter 3 Application Development Information
Description
3
103