Configuring Power save
To configure how long the handset remains idle before entering an
energy-saving state, perform the following steps:
Power save
Select
Save
5. Press the
Clr
idle display.
1. Open the
Display
"Accessing the Display settings menu" (page
2. Press the
Up
option.
save
3. Press the
Select
4. Use the
Dialpad
— the first value (from 1 to 59 seconds) defines
the time before the display becomes dim.
— the second value (from 1 to 59 seconds)
defines the time before the display switches off
(after the display becomes dim). If you
configure the second value as 0, the display
never switches off and the handset battery
discharges faster.
Attention: To conserve the battery charge of your
handset, the display automatically dims during
calls. Press the
To configure the number of seconds that elapse
before the display dims, change the "first value"
timer in Power save settings. For more information,
see
"Configuring Power save" (page
5. Press the
Save
key one or more times to return to the
menu using the steps in
or
key to highlight the
Down
soft key.
to enter the time period:
key to restore the display.
OK
soft key.
Telephone settings
189).
Power
195).
195