Table of Contents
Advertisement
To configure Missed call time on your handset, perform the following
steps:
Select
Configuring Cadence Mode
A cadence defines the duration of the on and off phases of a ringing
cycle. You can use the Tones and Cadences feature on the Avaya
Communication Server 1000 (Avaya CS 1000) system to configure ring
cadences to identify different types of incoming calls. For more
information about Tones and Cadences on Avaya CS 1000, see Avaya
Features and Services Fundamentals (NN43001-106).
Attention: Cadence Mode is applicable to traditional DECT systems
only (based on DMC cards). If you enable or disable
Cadence Mode for a SIP DECT solution, there is no impact.
To cause your DECT handset to use the ring cadences configured on
your CS 1000 system, you must activate Cadence Mode on your DECT
handset. This allows the PBX system to control the on and off phases of
1. Open the
Sounds and alerts
in
"Accessing the Sounds and alerts menu"
(page
174).
2. Press the
Up
time.
3. Press the
Select
4. Use the Dialpad to enter the value in range of 0 to
99.
5. Press the
Save
6. Press the
Clr
idle display.
menu using the steps
or
key to highlight
Down
soft key.
soft key to apply the changes.
key one or more times to return to the
Telephone settings
Missed call
187
Advertisement
Table of Contents
