Configuring Vsan Trunking; Information About Vsan Trunking - Cisco Nexus 6000 Series Configuration Manual

Configuring VSAN Trunking

This chapter describes how to configure VSAN trunking.
This chapter includes the following sections:
•
Configuring VSAN Trunking

Information About VSAN Trunking

VSAN trunking enable interconnected ports to transmit and receive frames in more than one VSAN. Trunking
is supported on E ports and F ports.
VSAN trunking is supported on virtual Fibre Channel interfaces.
The VSAN trunking feature includes the following restrictions:
• Trunking configurations are applicable only to E ports. If trunk mode is enabled in an E port and that
• The trunk-allowed VSANs configured for TE ports are used by the trunking protocol to determine the
• If a trunking-enabled E port is connected to a third-party switch, the trunking protocol ensures seamless
OL-27932-01
Configuring VSAN Trunking, page 55
port becomes operational as a trunking E port, it is referred to as a TE port.
allowed-active VSANs in which frames can be received or transmitted.
operation as an E port.
Cisco Nexus 6000 Series NX-OS SAN Switching Configuration Guide, Release 6.x
5
C H A P T E R
55