Honda GoldWing GL1500 2000 Owner's Manual page 98

CB Radio (U.S. SE only)
H
• To switch between speaker and headset output, push this
knob. The display
will
indicate:
D.
when sound is coming from the speakers
n
when sound is coming from the headsets
• To eliminate noise (hissing) between transmissions and to
enable automatic switch-over between CB calls and the
radio/cassette player - tum the knob clockwise.
Using the CD Radio
LEFT SIDE
channel
select lever
LEFT SIDE
talk lever
1.
Tum me ignition
switch to ACe or 0 .
2. Push the power switch/volume control knob in to tum the
power on.
3. Select the desired channel by using the channel select lever.
• To select the next higher channel - push the lever up.
• Top select the next lower channel- push the lever down.
4. Tum the squelch control knob counterclockwise until it
stops. At this position, the CB radio is most sensitive with
noise in the background. The RX indicator lights up on the
display.
(cont'd)
Audio Systems 91