Honda GoldWing GL1500 2000 Owner's Manual page 141

Wheels
rear hub
-----L
final drive
gear splines
2. Tighten the nuts and bolts to the specified torque.
Axle nut: 80 Ibf-fl (108 Nm, 11.0 kgf-m)
Axle pincb bolt: 23 Ibf...ft (31 N'm, 3.2 kgf-m)
Sbock absorber
bol~
upper: 17 Ibf...ft (23 N'm,
2.3 kgf-m)
Shock a!>sorber
bol~
lower right: 171bf...ft (23 N'm, 2.3 kgf-m)
lower
left:
511bf...ft (69 N'm, 7.0 kgf-m)
If
a torque wrench was not used for installation, see your
Honda dealer as soon as possible to verify proper assembly.
Improper assembly may lead to loss of braking capability.
3. After installing the wheel, braking efficiency may be
temporarily impaired. Apply the brake several times, each
time checking
that
the wheel rotates freely when the brake is
released. Recheck the wheel
if
the brake drags or if the
wheel does not rotate freely.
134
Maintenance