Honda GoldWing GL1500 2000 Owner's Manual page 78

Riding with Cruise Control
To Set Cruise
COD~
1. Make sure you are in 4th gear or 00 (5th gear), and that
your speed is between 30 and 80 mph (48 and 128
km/h).
Any speed above 80 mph (128
km!h)
will
be
memorized as
80 mph (128
kmih).
2. Push the cruise control master switch. (lbe CRUISE ON
indicator
will
come on.)
3. Accelerate to the desired speed.
4. Push the SETIDECEL switch. (The CRUISE SET indicator
will
come on.)
'Ib Change the Set
S
Th..fine Tune the Set Speed.
• To increase the set speed - tap the RESUME/ACCEL
switch.
• To decrease the set speed - tap the SETIDECEL switch.
Each quick tap (brief push and release) on either switch will
change your speed by approximately 1 mph (1.6 km/h).
To Autornatical.u:. . . Q mn2e the Set Speed.
• To increase lbe set speed -
hold the RESUME/ACCEL
switch in. The system will accelerate your motorcycle
automatically. When you reach the desired speed, release
the switch.
• To decrease speed - hold the SET/DECEL switch in. The
system will automatically slow your motorcycle. When you
reach the desired speed, then release the switch.
Riding
71