NEC SL2100 Installation Manual page 90

SL2100
Stutter Blink = LED pattern 4 (2W Digital/IP Multiline Terminal).
Conditions
• When a key is programmed using service code 752, it cannot be programmed with a function using
the 751 code until the key is undefined (000). For example with a Park Key programmed by dialing
752 + 04 must be undefined by dialing 752 + 000 before it can be programmed as a Voice Over
*
key by dialing 751 + 48.
Feature Cross Reference
Program
• Refer to Table 4-4 Function Number List on page
15
Telephone Programming Instructions
To enter data for Program 15-07 (Programmable Function Keys):
1. Enter the programming mode.
2. 15 07
3. Enter the number of the item you want to program.
4. To select the telephone number to be programmed, press the FLASH or the volume ▲ or ▼ keys.
5. Enter data for the item you selected + Hold.
6. Enter data for the next item in the program.
- OR -
Press MSG once to enter a new item number.
- OR -
Press MSG until you exit that series programming section.
4-24
4-18.
Program 15 : Extension, Basic Setup
ISSUE 1.0