NEC SL2100 Installation Manual page 78

SL2100
Item
No.
12 Off-Hook Ringing 0 = Muted Off-Hook
13 Redial List Mode
Program
15
15 Storage of Call-
er-ID for an-
swered call
16 Handsfree Oper-
ation
18 Power-Saving
Mode
21 Virtual Extension
Access Mode
(when idle Virtual
Extension key
pressed)
22 Multiple Incom-
ing From Inter-
com and Trunk
23 Speed Dial Pre-
view Mode
4-12
Item Input Data
Ringing
1 = No Off-Hook Ring-
ing
2 = Not Used
3 = Beep in Speaker
(SP)
4 = Beep in Handset
(HS)
5 = Speaker and Hand-
set Beep
0 = ICM/Trunk (Exten-
sion/Trunk Mode)
1 = Trunk Mode
0 = Disable (Off)
1 = Enable (On)
0 = Disable (Off)
1 = Enable (On)
0 = Normal mode
1 = Power-Saving
Mode (Eco-Mode)
0 = DSS
1 = Outgoing (OTG)
2 = Ignore
0 = Disable
1 = Enable
0 = Preview
1 = Outgoing Immedi-
ately
Description
Use this option to set the telephone
Off-hook signaling. Off-hook signal-
ing occurs when a telephone user
receives a second call while busy on
a handset call. To enable/disable
Off-hook signaling for an extension
Class of Service, use Program
20-13-06.
Select whether the Redial List fea-
ture should store internal and exter-
nal numbers (0), or only external
numbers (1).
Enable or disable an extension abili-
ty to use the speakerphone on out-
side calls. When disabled, users can
hear the conversation, but cannot
respond handsfree.
Determine whether a Virtual Exten-
sion (VE) should function as a DSS
key or a Virtual Extension. When
DSS (0) is selected, the key func-
tions as a DSS key to the extension
and for incoming calls to that exten-
sion. When Outgoing (1) is selected,
the key functions as a virtual exten-
sion and can be used for incoming
and outgoing calls. When Ignore (2)
is selected, the key functions can re-
ceive incoming calls only.
If enabled, this affects how a Hotline
key lights, based on the setting in
Program 22-01-01. If 22-01-01 is set
to 1 for trunk priority, the Hotline key
lights solid when a trunk call rings
in. If 22-01-01 is set to 0 for inter-
com priority, the Hotline key does
not light for incoming trunk calls, but
lights solid for intercom calls. If
15-02-22 is disabled, Hotline keys
light solid for any incoming calls re-
gardless of the setting in Program
22-01-01.
This option defines how a speed dial
key functions when pressed. If set to
Preview (0), the speed dial number
can be previewed before dialing. If
set to Outgoing Immediate (1), the
number is dialed immediately.
Program 15 : Extension, Basic Setup
ISSUE 1.0
Default Related
Program
5
0
1
1
1
2
1 22-01-01
0