Table of Contents
Advertisement
5.
Select [Wireless LAN]
6.
Select [Communication Mode]
7.
Select the transmission mode of the wireless LAN
8.
If [802.11 Ad-hoc Mode] is selected for [Communication Mode], select [Ad-hoc
Channel]
9.
Select the Ad-hoc channel
Select an Ad-hoc channel according to the IEEE 802.11 standard you are using.
• When using IEEE 802.11 b/g:
Channels 1–11
• When using IEEE 802.11 a:
Channels 36, 40, 44, and 48
• When using IEEE 802.11 n:
Channels 1–11, 36, 40, 44, and 48
• The transmission mode of the wireless LAN can also be set using Web Image Monitor. For
details, see Web Image Monitor Help.
Setting the SSID
Press the [Menu] key, and then select the setting items using the [ ] or [ ] key.
1.
Select [Host Interface]
2.
Select [Wireless LAN]
3.
Select [SSID Setting]
4.
[SSID]
You can switch between lower/upper case letters and numeric characters by pressing
[ab/AB/12].
The characters that can be used are ASCII 0 × 20-0 × 7e (32 bytes).
• The SSID can also be set using Web Image Monitor. For details, see Web Image Monitor
Help.
Setting the communication mode
1.
Press the [User Tools] key, and then display the [Network] screen.
[System Settings]
midas-p3_com_operating_instructions_gb_00198499_eng.xml
Press [OK]
Press [OK]
Press [OK]
Press [OK]
Press [OK]
Press [OK]
[Enter]
Enter the SSID
[Interface Settings]
Press [OK]
Press [OK]
Press [OK]
[Network]
Configuration
95
Draft 2016/01/18
Advertisement
Table of Contents
