Table of Contents
Advertisement
2. Setting Up the Printer
5.
Fully insert the interface board.
Check that the interface board is firmly connected to the controller board.
6.
Tighten the two screws to secure the interface board.
7.
Attach the cable cover.
8.
Plug in the power cord, and then turn on the printer.
9.
Print the configuration page to confirm that the board was attached correctly.
64
DPP027
DPP028
DPP029
midas-p3_com_operating_instructions_gb_00198474_eng.xml
Draft 2016/01/18
Advertisement
Table of Contents
