Ricoh PRSPC342DN1 User Manual page 87

Table of Contents

Select the communication mode

802.11 Ad-hoc Mode

Select ad-hoc channel

Select Security Type

Confirm the connection

• When [802.11 Ad-hoc Mode] is selected in Communication Mode, select the channel for [Ad-hoc

Channel]. Set a channel that matches the type of wireless LAN being used. For details about setting

the Ad-hoc Channel, see page 93 "Wireless LAN Configuration".

• For details about security type settings, see Security Guide.

Checking the signal

This section explains how to check the printer's radio wave status.

When using in infrastructure mode, you can check the printer's radio wave status using the control panel.

Press the [Menu] key, and then select the setting items using the [ ] or [ ] key.

Select [Host Interface]

Select [Wireless LAN]

Select [Wireless LAN Signal]

The printer's radio wave status appears.

Press the [User Tools] key, and then display the [Wireless LAN] screen.

[System Settings]

midas-p3_com_operating_instructions_gb_00198490_eng.xml

Set the SSID

Press [OK]

[Interface Settings]

Select the communication mode

Infrastructure Mode

Set the SSID

Select Security Type

Confirm the connection

[Wireless LAN]

Connecting the Printer

CQT650

Draft 2016/01/18

Table of Contents