Protected Valet Mode; Remote-Controlled Valet - Avital Bandido 2 Owner's Manual

Protected Valet Mode

You can place your system in Protected Valet Mode when your car is being
serviced by mechanics, car wash personnel or driven by valet attendants, and
still maintain possession of your remote control(s). While in Protected Valet
Mode, all alarm functions are bypassed to prevent undesired or accidental
arming. Remote-controlled lock/unlock and all optional accessories will still
operate.
To Turn on Protected Valet Mode:
1. Turn your ignition key to the "ON" position or start the vehicle.
2. Flick the valet switch to the "ON" position.
3. The LED will turn on solid red to indicate the system is in Protected Valet
Mode.
4. Turn your ignition key to the "OFF" position.
To turn off Protected Valet Mode:
1. Turn your ignition key to the "ON" position or start the vehicle.
2. Flick the valet switch to the "OFF" position.
3. The LED will turn off to indicate the system is no longer in Protected Valet
Mode.
4. Turn your ignition key to the "OFF" position.

Remote-Controlled Valet

For your convenience, the system can be put into Valet Mode via the remote
control. While in Remote-Controlled Valet, all alarm functions are bypassed.
Remote-controlled lock/unlock and all optional accessories will still operate.
NOTE: The system must be disarmed and the Anti-Carjacking feature
deactivated in order to activate the Remote-Controlled Valet feature.
To Activate Remote-Controlled Valet:
1. Press remote control buttons #1 and #3 at the same time for 1-2 seconds.
2. The parking lights will flash 4 times, and the LED will turn on solid red.
To Deactivate Remote-Controlled Valet:
1. Press remote control buttons #1 and #3 at the same time for 1-2 seconds.
2. The parking lights will flash 3 times and the LED will turn off.
6
2
Bandido Owner's Manual