Configuration File Parameter Changes - Polycom 1725-31402-001 User Manual

Release Notes - UC Software
 51631: Phone not releasing first assigned IP address when VLAN is set via
DHCP.
 51633: Phone fails to play busy/reorder tone upon a refer based transfer when
it gets a 603 or 486 response
 51644: Some Japanese strings do not display correctly.
 51690: EFK feature is used for onetouch Voicemail dialing. When using on
3.1.3 the phone appears not to honor the stickyautolinesieze
 51718: Phone continues to ring after the call has been answered with a certain
call signaling sequence.
 51763: SoundStation IP 7000/HDX Integration: When Adding video to an
existing call. IP7000 shows as on Mute but Far end can hear them.
 51838:Some Japanese characters are not properly displayed.
 52014/53597: In SIP 3.x.x when an IP phone picks up a transferred call in a
certain scenario, the call is immediately placed on Hold instead of being
connected.
 52017: Web interface issue Password entry is not masked when entered (since
SIP 3.0.0)
 52108: Phone fails to restore destination to Asserted Identity or Remote ID
after a transfer fails

2.12.4 Configuration File Parameter Changes

This section lists the parameters that have been added/changed or deleted from the
template phone1.cfg and sip.cfg files. For further description of parameters please refer to
the Administrator‟s Guide for the SIP 3.2 Release.
Note also that the template 000000000000.cfg file has been modified in order to facilitate
support for the Legacy phones and the VVX 1500 in this release.
File Change Attribute
sip added call.directedCallPickupMethod
sip added call.parkedCallRetrieveMethod
sip added call.parkedCallRetrieveString
sip added dialplan.applyToRemoteDialing
sip added dialplan.applyToTelUriDial
sip added ind.class.2.state.35.index
sip added ind.class.2.state.36.index
sip added ind.class.2.state.37.index
Copyright © 2011 Polycom, Inc.
Old
value New value
"native" or
"legacy"
"native" or
"legacy"
Star code
0 or 1;
Default is 0
0 or 1
Default is 1
44
42
43
Changes
Description
See Administrator‟s Guide
for SIP 3.2.0 for details
See Administrator‟s Guide
for SIP 3.2.0 for details
See Administrator‟s Guide
for SIP 3.2.0 for details
A flag to determine if the
dial plan applies to
for calls made through the
Polycom HDX
system.
A flag to determine if the
dial plan applies to
uses of the tel:// URI.
Changes Relating to
screen layout
Page 69