Table of Contents
Advertisement
Release Notes - UC Software
2.25.4 Configuration File Parameter Changes
.cfg File
Action
sip
added
sip
added
sip
added
sip
added
sip
added
sip
added
sip
added
sip
added
sip
added
sip
added
sip
changed
sip
changed
sip
changed
sip
added
Copyright © 2011 Polycom, Inc.
Parameter
voIpProt.SIP.strictLineSeize
voIpProt.SIP.strictUserValidation
voIpProt.SIP.lineSeize.retries
voIpProt.SIP.header.diversion.enable
voIpProt.SIP.header.list.useFirst
voIpProt.SIP.header.warning.codes.accept
voIpProt.SIP.header.warning.enable
voIpProt.SIP.musicOnHold.uri
lcl.ml.lang.tags.x
up.numberFirst CID
saf.1
voice.aec.hs.enable
voice.aes.hs.enable
call.directedCallPickupString
Description
If set to 1, forces the phone to wait for
200 OK response when receiving a
TRYING notify.
If set to 0 or Null, this is old behavior.
If set to 1, forces the phone to match
user portion of signaling exactly.
If set to 0 or Null, phone will use first
registration if the user part does not
match any registration.
Controls the number of times the
phone will retry a notify when
attempting to seize a line (BLA).
If set to 1, the diversion header is
displayed if received.
If set to 0 or Null, the diversion
header is not displayed.
If set to 1 or Null, the first diversion
header is displayed.
If set to 0, the last diversion header is
displayed.
A list of accepted warning codes.
If set to Null, all codes are accepted.
Only codes between 300 and 399 are
supported.
If set to 1, the warning header is
displayed if received.
If set to 0 or Null, the warning header
is not displayed.
A URI that provides the media stream
to play for the remote party on hold.
If reg.x.musicOnHold is set to Null,
this attribute is checked.
The format is:
• The first two letters are the ISO-639
language abbreviation.
• The next two letters are the ISO-
3166 country code.
• The next two letters are the ISO-639
language abbreviation.
• The remainder of the string is the
preference level for the display of the
language, or English if the language
is not available
If set to 0 or Null, caller ID display will
show caller‟s name first.
If set to 1, caller ID display will show
caller‟s number first.
The default value is Null. To allow the
SoundPoint IP welcome sound to be
played on reboots and restarts, set to
SoundPointIPWelcome.wav
The default value is enabled (1).
The default value is enabled (1).
The star code to initiate a directed call
pickup.
Changes
Page 101
Advertisement
Table of Contents
