Configuration File Parameter Changes - Polycom 1725-31402-001 User Manual

Release Notes - UC Software
 35320: If two function keys are remapped to dial specific speed dial
numbers, only the first one will work
 35480: SoundPoint IP 320 and 330 phones allow watching only 7
buddies instead of 8 and may lock-up when an 8
added
 35490: SoundPoint IP 320 and 330 phones do not display SAS-VP failure
messages during boot-up
 35879: Nonce counter not incremented in PRACK
 36031: If a phone is configured to use TLS for the 2
st
the 1
 36107: SoundStation IP 4000 phone drops maximum size packets when
VLAN is enabled
 36477: Configuring the nat.signalPort parameter may cause the phone
to lock-up
 36775: Route-Set susceptible to change mid-dialog in certain situations
 36882: Selecting a speed dial number using the „nn#‟ key sequence
does not work on SoundPoint IP 320 and 330 phones when the phone is
unregistered or is using URL dialing mode
 36905: CDP packet always advertises LAN duplex mode as "Duplex:
Full"
 36948: On SoundPoint IP 320 and 330 phones, if the Dial and Menu keys
are pressed at the same time after entering digits from the idle display,
incorrect soft keys are displayed
 36967: If the phone receives an INVITE with SDP which contains video
information, it returns a malformed response
 37086: Phone ignores expiration date of CA certificate if SNTP is only
set via DHCP
 37632: Out of order SCA signaling can lead to improper handling of
Shared Lines in some situations.
 37646: DNS SRV querying after A record cache makes registration fail

2.36.4 Configuration File Parameter Changes

.cfg File Action
sip added
sip added
sip added
sip added
sip added
Copyright © 2011 Polycom, Inc.
nd
, the 2 line does not register
Parameter
voIpProt.SIP.csta
voIpProt.SIP.serverFeatureControl.d
nd
voIpProt.SIP.serverFeatureControl.c
f
up.toneControl.bass
up.toneControl.treble
th
watched buddy is
nd
line and TCP for
Description
Not currently used, will be used in a
future release.
See Administrator‟s Guide for SIP
2.2.0 for details
See Administrator‟s Guide for SIP
2.2.0 for details
Not currently used, will be used in a
future release.
Not currently used, will be used in a
future release.
Changes
Page 127