Release Notes - UC Software
69421: VVX1500: Phones fail to pass special character '$' in the password via
DHCP Option 66.
69671: Phones fail to learn VLAN ID from DHCP option 129 in specific
scenario.
70027 and 62203: Conference with Genband CS2000 does not work properly.
70988: SoundPoint IP 550: Phone when powered by external AC power reboots
during playing of certain audio on full volume.
70233: When URL dialing is disabled, user is prompted for URL when
attempting to transfer call after using directed call pickup of a monitored BLF
line.
70317: During an active IVR call, if there is a second incoming call to the same
line the phone does not send DTMF.
70456: SoundPoint IP 450: Phones does not show the complete text on the
microbrowser screen. Certain text is truncated.
71071: SoundPoint IP 33x: The inbound caller ID does not display for a new
call during an active call on the phone. Observed this in version 3.2.5 and
3.3.1
71328: Modifying the phone username via phone web user interface changes
the password from numeric values to "????" (four question marks).
71947
SoundPoint IP650: When the phone lock feature is enabled, outbound
:
calls can be dialed using line key, handset, headset and speakerphone key.
72766: SoundPoint IP650/670: When the configuration parameter ( device.set)
is set with a new boot server ip address, it does not force the phone to reboot.
Configuration Parameter Changes
2.1.4
Configuration Parameter
call.clickToDial.referBased.userConfirm
call.shared.notifyTransferHoldAsActive
Copyright © 2011 Polycom, Inc.
Action
Property
added
accessType
callback
cfgParamType
default
help
templates
type
added
accessType
callback
cfgParamType
default
Changes
Old
New Value
Value
Admin
DefaultCbNo
ne
param
0
sip-interop
Bool
Admin
DefaultCbRe
start
param
0
Page 13