Configuration File Parameter Changes - Polycom 1725-31402-001 User Manual

Release Notes - UC Software

2.40.4 Configuration File Parameter Changes

.cfg Action
File
phone1 added
phone1 added
phone1 added
phone1 changed
sip added
sip added
sip added
sip changed
sip changed
sip changed
sip changed
sip changed
sip added
sip changed
sip changed
sip changed
sip added
Copyright © 2011 Polycom, Inc.
Parameter
reg.x.server.y.lcs
dialplan.x.applyToUserSend="1"
dialplan.x.applyToUserDial="1"
dialplan.x.applyToCallListDial="0"
dialplan.x.applyToDirectoryDial="0"
reg.x.server.y.transport and
reg.x.outboundProxy.transport
msg.mwi.x.callBackMode="disabled" to
msg.mwi.x.callBackMode="registration"
(for x = 2, 3, 4, 5, 6) [changed for bug
13818]
voIpProt.server.1.lcs
voIpProt.SIP.useSendonlyHold
dialplan.applyToUserSend="1"
dialplan.applyToUserDial="1"
dialplan.applyToCallListDial="0"
dialplan.applyToDirectoryDial="0"
dialplan.digitmap.timeOut="3" to
"3|3|3|3|3|3"
tcpIpApp.sntp.daylightSavings.start.mo
nth="4" to "3"
tcpIpApp.sntp.daylightSavings.start.dat
e="1" to "8"
tcpIpApp.sntp.daylightSavings.stop.mon
th="10" to "11"
tcpIpApp.sntp.daylightSavings.stop.day
OfWeek.lastInMonth="1" to "0"
call.stickyAutoLineSeize.onHookDialing
voice.gain.rx.digital.chassis.IP_650="-9"
to "6"
voice.gain.rx.digital.ringer.IP_650="-21"
to "-12"
voice.handset.sidetone.adjust.IP_430="
-12" to "-13"
voIpProt.server.x.transport and
voIpProt.SIP.outboundProxy.transport
Description
Refer to Technical Bulletin 5844.
Refer to Technical Bulletin 11572.
Added "TCPOnly" as a possible value for
these existing parameters.
Refer to Technical Bulletin 5844.
Can be set to 0 or 1. Null default is 0.
Default in sip.cfg is 1.
If set to 1, the phone will send a reinvite
with a stream mode attribute of "sendonly"
when a call is put on hold. This is the
same as the previous behavior.
If set to 0, the phone will send a reinvite
with a stream mode attribute of "inactive"
when a call is put on hold.
Note:
The phone will ignore the value of this
parameter if set to 1 when the parameter
voIpProt.SIP.useRFC2543hold
is also set to 1 (default is 0).
Refer to Technical Bulletin 11572.
Refer to Technical Bulletin 11572.
Changes to support new daylight savings
time rules.
Refer to Administrator‟s Guide Addendum
for SIP 2.1.
Gain changes required to match new
software load.
Added "TCPOnly" as a possible value for
these existing parameters.
Changes
Page 141