Version 3.3.0; Added Or Changed Features - Polycom 1725-31402-001 User Manual

Release Notes - UC Software

2.4 Version 3.3.0

2.4.1 Added or Changed Features

 23335: Configuration parameter values can now be updated at run-time.
 24111: Improved the user interface for selecting a distinctive ring tone
associated with a contact in the local directory. You can now review the ring
name and play the ring tone before accepting and associating the ring tone for
specific contacts.
 23394: Configuring parameters are now self-contained (default parameter
values) and the configuration process is more fault-tolerant.
 35245: Line key behavior (configurable) has changed such that keys can now
be used to hang-up/terminate calls as well as establishing calls. The
associated configuration parameter is: param name=
"up.lineKeyCallTerminate" type="Bool" default="0" min="0" max="1".
 38826: Added configuration parameters to expand the range of ports as well
as to randomize port selection for the purpose of downloading configuration
files to the phone using TCP connections.
 48138: SoundPoint IP320, 321, 330, 331, 335, 450, 550, 560, 650, 670: Added
support for dynamic support of G.729AB and iLBC codecs. G.729AB / iLBC.
 48526: Simplified selection of codec configuration preferences. See TB60519
for details. THIS CHANGE IS NOT BACKWARD COMPATIBLE to configuration
files used with previous software releases.
 48690: Phone Lock Feature: Added the ability for users to lock the phone and
restrict its access from unauthorized users. Users must enter a PIN in order to
access and use the phone. Refer to Quick Tip "QT 57215 Phone Lock Feature"
for additional information regarding this features use and configuration.
 49658: Added configuration parameter to allow the phone to obtain "Caller ID"
from the "from" header instead of the "P-Asserted-Identity" segment. The
associated configuration parameter is: voIpProt.SIP.CID.sourcePreference =
"P-Asserted-Identity", "Remote-Party-ID", or "From".
 50067: Local contact directory now matches the Polycom CMA product‟s style
and user experience.
 50151: Removed redundant levels of abstraction associated with arrays in
"config" files.
 50644: VVX 1500: Improved the visual indicator of incoming calls for the
hearing impaired. Upon receiving an incoming call, the phone will ring and the
display will flash on and off with a bright orange and white screen. This visual
indicator can be seen even when the display is viewed at an indirect angle.
The associated configuration parameter is: up.accessibilityFeatures="1".
 51121: RAM disk configuration parameters have been optimized.
 51314: Added a configuration option to allow for minimal latency in order to
meet JITC requirements.
Copyright © 2011 Polycom, Inc.
Changes
Page 25