Configuration File Parameter Changes; Version 2.2.1 (Limited Release); Added Or Changed Features; Removed Features - Polycom SOUNDPOINT 3804-11530-222 Release Notes

Sip application 2.2.2
Table of Contents

Advertisement

Release Notes - SIP Application
• 38344: If URL-dialing is disabled in the configuration file, the phone shows
Number@ServerIP for caller ID (This issue occurs on SIP 2.2.0 and SIP 2.2.1
releases only).
• 38430: In a BLA configuration attempting to make a call on a remotely busy
shared line may cause the phone to re-boot instead of displaying "Service
Unavailable". Occurs on SoundPoint IP 330/320, 430, 550, 650 phones.
• 38435: When the phone's local directory is writable, unable to add a new
contact by selecting "new entry" on SoundPoint IP 330/320 phones.
• 38666: If a call is initiated in hands-free mode and the Ringback Tone is server
generated the far-end user may experience echo when they answer the call. If
the originating phone is switched to handset mode and back to hands-free
mode the echo goes away. Occurs on SoundPoint IP 330/320, 430, 550, 650
phones.
• 38678: In a particular network configuration when using BLA the bridged line
indication does not light up properly due to a missing NOTIFY from the phone.

2.1.4 Configuration File Parameter Changes

.cfg File
Action
sip
added
sip
added
sip
added
sip
added
sip
added

2.2 Version 2.2.1 (Limited Release)

2.2.1 Added or Changed Features

• 38371: When SIP over TLS is configured the phone will send TCP Keep-Alive
messages to the SIP server every 30 seconds, and will retry 3 times (at 20
seconds) before resetting (RST) the connection if no response is received

2.2.2 Removed Features

None.
Page 4
Parameter
tcpIpApp.keepalive.tcp.
idleTransmitInterval
tcpIpApp.keepalive.tcp.
noResponseTrasmitInterval
tcpIpApp.keepalive.tcp.sip.tls.
enable
dir.local.readonly
pres.idleSoftKeys
Copyright © 2007 Polycom, Inc.
Description
Sets the interval of the TCP keep-
alive packets.
Set the retransmission interval when
the server fails to acknowledge the
TCP keep-alive.
Enables sending a TCP keep-alive
packet from the phone to the server.
The server is expected to respond
with a TCP keep-alive ack. This is
only used with TLS sessions.
When set to "1", the contact directory
cannot be changed and
[MACADDRESS]-directory.xml is not
uploaded.
If set to "0", appearance of presence
idle soft keys is disabled.
Changes

Advertisement

Table of Contents
loading

Table of Contents