Corrections; Version 3.2.3; Added Or Changed Features - Polycom 1725-31402-001 User Manual

Polycom ip phone user guide

Table of Contents

Release Notes - UC Software

2.7.3 Corrections

 59308: A retransmitted INVITE message causes a "400 Bad Response" reply.

This is in violation of RFC 3261 section 17.2.1.

 65207: A consistent but slow memory leak occurs as a result of receiving

INVITE messages containing "replaces".

 65435/65725: SoundPoint IP/VVX 1500: [IEC 60268-1]: The default and

maximum values for the headset and headphone audio levels have been

adjusted to ensure compliance with the IEC 60268-1 TUV safety requirements.

 65660: The BootBlock may become corrupted as a result of accessing

unprotected section of flash memory.

 43099: Added support for SoundStation IP 5000 Conference Phone.

 43297: Sound effects can now be played out of a destination based on user

configuration. Configuration parameters: se.destination= "chassis",

"handset","headset" or "active". Default is "chassis".

 45462: All SoundPoint and SoundStation phones now comply with "retry-

after" instructions embedded in SIP Response codes 500 and 503 as part of

 50739: SoundStation IP 7000 – HDX Integration: On a multi-leg conference,

when the 'End Call' soft key or the 'On Hook' hard key is pressed, the

conference phone will ask the user if the entire call should terminated. A

negative response will guide the user to the conference "manage" menu to

allow the user to terminate the individual legs of the call. The dialog only

appears for multi-leg conference calls.

 51753: SoundPoint IP 450: Improved the appearance of anti-aliased characters.

 51940: All SIP phones now have a "fail-over" feature that enables phones to

re-register before diverting SIP signaling to an alternate server.

NOTE: This feature will be formally released and documented in a future

release.

 54041: Format of DHCP Option 60 Data is now configurable and added support

for Option 125 as per RFC 3925.

 54983: VVX 1500: Internal IP address of phone (instead of an alias) is no longer

being sent in the Facility Message.

Page 44

Changes

Table of Contents