Removed Features; Corrections - Polycom 1725-31402-001 User Manual

Polycom ip phone user guide
Table of Contents

Advertisement

Release Notes - UC Software
 48780: Add option to apply digit-map rules to tel:URI initiated calls
 48846: Add configuration option for whether the call appearance on a remotely
monitored BLF line should be presented on the monitoring/attendant phone.
 48861: Add configuration option voIpProt.SIP.strictReplacesHeader to control
whether the phone requires call-id,to-tag and from-tag to perform and INVITE
with Replaces.
 48984: Phone will populate the display-name field in the To header of
responses that it generates
 48998: Add configuration option for the phone to send 486 Busy when call is
rejected.
 49309: Combine SoundPoint IP 550 and 560 User Guides.
 49465: Update Destination of outbound call based on display-name in SIP To
header responses
 49660: Call Forward: "user=phone" should be included in "refer-to" parameter
of Refer: header
 49695: Allow for SDP offer or answer in provisional reliable response and
PRACK request and response
 49839: RTP Rx must detect and correct for G.722, G.722.1, G.722.1C, and G.719
RTP timestamp increments based on different sample rates
 50769: SoundStation IP 7000/HDX Integration: Add support for Hook-Flash
during POTS calls.
 50927: Add Equifax Secure eBusiness CA-1 to the trusted CA list.
 51419: RFC2543 hold not working when video SDP present in certain
scenarios

2.12.2 Removed Features

 48283: Remove support for SoundPoint IP 301, 501, 600, 601 phones.
 48698: Remove support for SoundStation IP 4000

2.12.3 Corrections

 27048: Application load progress bar doesn't match actual progress
 29148: Phone doesn't format the file system when it notes error on screen
while loading large configuration files.
 29344: HTTP Digest Authentication does not work on IIS.
 30219: Logs are not uploaded when phone resets to factory default
 31858: Shared line indicator led turns off when 2 phones resume
simultaneously
 34681: stickyAutoLineSeize and call.enableOnNotRegistered="0" seize wrong
line if 1st is unregistered
Copyright © 2011 Polycom, Inc.
Changes
Page 59

Advertisement

Table of Contents
loading

Table of Contents