Table of Contents
Advertisement
Calling and Answering
Polycom, Inc.
— From the idle screen, press
Information screen, scroll to the contact. Then, tap the contact, pick up
the handset, or press
(During a call, you cannot access the Speed Dial Information screen
by pressing
or
— If the contact has a speed dial index number that is equal to or less than
99, enter the speed dial index number from the idle screen, and then
press
(on the phone console). From the Speed Dial Information
screen, tap the Dial soft key, pick up the handset, or press
The call is placed.
Calling by Redialling
To redial a number, press
Calling Using the H.323 Protocol
Handling calls that use the H.323 protocol is an optional feature that your system
administrator enables. Your system may not support it or have an H.323 license.
For more information, contact your system administrator.
If your phone supports the H.323 protocol, be aware of the following limitations:
•
You cannot forward or transfer H.323 calls.
•
You cannot set up forwarding for lines that just use the H.323 protocol.
•
You cannot set up shared lines for lines that use the H.323 protocol.
•
You cannot place a call by just entering an H.323 name. To place a call using an
H.323 name, use URL-dialing mode and enter the following format for the URL:
<H.323 name>@<server name>
For example: VVX101@100.100.100.100
Your system administrator can set up your phone so that it can handle calls
that use either the SIP or H.323 protocol, or both protocols. Your phone may
be set up so that a line can handle one or both protocols.
If your phone can handle calls using both protocols, you may be able to choose
the protocol to use before you tap the Dial or Send soft key, or before a call is
automatically placed. You may also be able to choose to allow your phone to
automatically select the protocol to use.
Using the Basic Features of Your Phone
. From the Speed Dial
.
.)
. A call to your last placed call is attempted.
.
37
Advertisement
Table of Contents
