Changing When And How Video Displays; Enabling Or Disabling Video - Polycom 1725-16843-001 User Manual

Changing When and How Video Displays

Note
Changing When and How Video Displays

Enabling or Disabling Video

Polycom, Inc.
— To pause and display the current picture only, tap
the pictures one-by-one again, tap
— To stop displaying the pictures and return to the idle screen, tap
The pictures will not display again until you access the Picture Frame
feature again (unless you have a screen saver set up, or you enable
one).
— To set the picture that currently displays as the background picture for
your phone, tap
To remove the six keys from the touch screen, tap the touch screen. To display the
six keys again, tap the touch screen again.
You can update when and how video displays by doing the following:
• "Enabling or Disabling Video"
• "Changing the Clarity of Near-Site Video"
• "Changing How You View All Video Calls"
• "Setting the Call Rate for Video Calls"
You can enable or disable the transmission of near-site video. However, you
cannot enable or disable far-site video. If your phone receives far-site video,
your phone always displays far-site video.
By default, your phone always transmits near-site video, unless you do the
following:
• Stop the transmission of near-site video during a call. See
Stopping Near-Site Video During a Call"
• Stop the transmission of near-site video for all calls. See
Disabling Near-Site Video for All Calls"
If you stop or disable video,
.
.
on page 137
on page 141
on page 142
on page 148
on page 139.
on page 139.
will display next to near-site video.
Customizing the Phone Display
. To display
"Starting and
"Enabling or
137
.